Products
Pro-Tex™ 2K Chip Guard Kit
- OEM recommended
- Tintable and paintable
- Duplicate most OEM textures
- Topcoat with solvent or waterborne systems
- Best-in-class protection
- No special equipment needed
- Excellent gloss retention
- Tintable to match OEM colors
- Coarse to heavy texture
Pro-Tex™ 2K Chip Guard Kit
Part #40820
Dual-Mix™ Structural Impact Resistant Adhesive
- Dual-Mix™ Forever Warranty
- OEM recommended
- Superior impact and peel strength
- Excellent corrosion resistance
- 60 minute working time
- Minimized down times with multiple heat cure options
- Spacer beads for consistent bond line thickness
- Rivet and weld bonding compatible
Dual-Mix™ Structural Impact Resistant Adhesive
Part #39757
Plastic Adhesion Promoter
- OEM recommended
- Superior bonding properties
- Topcoat with most refinish products
- Excellent on olefin based plastics
- Easy to apply
- 3 convenient sizes
Plastic Adhesion Promoter
Part #39861
Zincweld™
- Zinc-based formula for best-in-class corrosion protection
- Enhanced adhesion to bare metal for added corrosion protection
- OEM recommended
- No flaking or peeling
- Not affected by cavity wax
- Minimizes the heat affected zone while welding
- Low weld spatter formula
- Smooth spraying and easy covering
- Compatible with MIG and STRSW welding
Zincweld™
Part #40773
Dual-Mix™ Heavy Bodied Seam Sealer
- Dual-Mix Forever Warranty
- OEM recommended
- Direct to metal
- Paintable immediately with most solvent-based coatings
- Correct color minimizes post-inspection liability
- Non-sag formula holds tooling marks
- Fast cure increases production
- Remains flexible without shrinking or cracking
- Sprayable for additional versatility
- Ideal for use with NEW ORBiT™ to duplicate OE ripple bead
Dual-Mix™ Heavy Bodied Seam Sealer
Part #40177
Dual-Mix™ Rigid Plastic Repair Material
- Dual-Mix Forever Warranty
- OEM recommended
- One product for bonding and repair
- Exceptional bonding strength
- Outstanding sanding and feather edging
- Heat set options available
- Fiber-enriched formula helps control swelling and halos
- Easy to dispense and spread
Metton is a registered trademark of Metton America, Inc.
Dual-Mix™ Rigid Plastic Repair Material
Part #40887
2K Urethane Chip Guard
- OEM reccomended
- 2K durability with 1K convenience
- Reproduces fine to coarse and light to heavy OE textures
- Builds heavy textures without trapping solvent
- No flash time required between coats
- 50 state compliant
- Pinhole free
- Easy to use shake-and-shoot system
- R.O. billable unit
- 16 defined textures with detailed instructions
- Non-yellowing and non-staining
- Tintable, paintable or can be used as a textured top coat
- Impact and chemical resistant
- Excellent for sound dampening
2K Urethane Chip Guard
Part #52000
Rust Preventer Cavity Wax
- OEM recommended
- Non-hardening
- Sprayable in 360° pattern with 71120 Aero Wand
- Superior adhesion
- Excellent corrosion protection
- Superior wicking
Rust Preventer Cavity Wax
Part #39573
Dual-Mix™ Multi-Purpose Panel Adhesive
- DUAL-MIX™ Forever Warranty
- OEM recommended
- Long working time
- Exceptional impact and peel strength
- Excellent corrosion resistance
- Spacer beads for consistent bond line thickness
- Non-sag formula
- Simple surface preparation
- Compatible with MIG or STRSW welding
Dual-Mix™ Multi-Purpose Panel Adhesive
Part #39747
Dual-Mix™ Panel Vibration Control Material
- DUAL-MIX™ Forever Warranty
- OEM recommended
- Excellent sag resistance
- Reduces noise and vibration
- Protects against corrosion
- Exceptional flexibility
- Up to 60 minutes of working time
Dual-Mix™ Panel Vibration Control Material
Part #39977
Dual-Mix™ Multi-Plastic Repair Material
- DUAL-MIX™ Forever Warranty
- OEM recommended
- No adhesion promoter necessary
- Exceptional sanding and feather edge
- Remains flexible
- Does not shrink or pinhole
- Excellent leveling and sag resistance
Dual-Mix™ Multi-Plastic Repair Material
Part #39847
Dual-Mix™ Medium Bodied Seam Sealer
- DUAL-MIX™ Forever Warranty
- OEM recommended
- Direct to metal
- Paintable immediately
- Will not shrink, harden or crack
- Non-sag formula duplicates OEM sealers
- Fast cure increases production
- Sprayable for additional versatility
Dual-Mix™ Medium Bodied Seam Sealer
Part #39377
Featured Products
Performance Abrasives
Part #SA1XXX, SA22XXX, SA3XXX, SA6XXX, SA33000S, SA63000S, SA4947, SA4948, SA6047, SA6048, SA12XXX, SA120CG, SA120MM, SA38XXX, SA380CG, SA380MM, SA25XXX, SA250CG, SA35XXX, SA350CG, SA55050, SA40020
SEM Performance Abrasives are specifically designed for today’s complex automotive repairs.
GLADIATOR™ XC
Part #56650, 56670, 56648, 56654, 56674
GLADIATOR™ XC is a high quality, 2K urethane, texture coating that provides a durable, chemical and fade resis...
Specialty Tapes
Part #SM0001, SM0002, SM0004, SM0005, SM0006, SM0007, SM0008, SM0009, SM0010, SM0011 SM0012, SM0013, SM0014, SM0016
When you demand that your tapes have the same high standards as your paint work, you can expect results. No ma...
Auto Refinishing Masking Tape
Part #SM0018, SM0036, SM0048
Auto Refinishing Masking Tape is the ultimate solution for all the critical automotive aftermarket needs.
